How To Change 2003 Lexus Es300 Headlight Assembly

Footstep 1

Open the hood of the ES300 and prop information technology open.

<LI id=jsArticleStep2 itxtvisited="1">Step 2

Wait at the headlight associates from the top down. Depending on your model yr, in that location may be a plastic console covering the meridian of the headlight associates. If this is present, remove information technology by lifting all of the plastic clips effectually the edges and lifting it off.

<LI id=jsArticleStep3 itxtvisited="1">Pace 3

Locate the three bolts that hold the headlight associates in place. Two of the bolts are in the left and correct rear corners of the assembly, and the third is on the side adjoining the exterior edge of the machine, screwed into the back of the fender panel. Remove all of these bolts with a small adaptable wrench. Though they appear to exist designed to be removed with a screwdriver, the way they're arranged makes it almost impossible to remove them with ane.

<LI id=jsArticleStep4 itxtvisited="1">Step four

Slide the unabridged headlight assembly forward a few inches so that you can attain the back of information technology.

<LI id=jsArticleStep5 itxtvisited="one">Step v

Unscrew the plastic bulb socket assembly. This is the large, circular component located right in the middle of the dorsum of the master associates. Plough it nearly a quarter plow to the left and you can pull it away from the main assembly. If you're replacing both the bulb and the main assembly, see the next department on how to supersede the bulb, then resume this process.

<LI id=jsArticleStep6 itxtvisited="1">Step six

Unplug all wiring harnesses from the back of the main assembly. Depending on your model twelvemonth, there may be ane, two or iii wiring harnesses.

<LI id=jsArticleStep7 itxtvisited="ane">Step 7

Pull the one-time assembly completely away from the auto.

<LI id=jsArticleStep8 itxtvisited="i">Stride 8

Slide the new assembly part of the way into place and reconnect all the wiring harnesses to the corresponding sockets on the back.

<LI id=jsArticleStep9 itxtvisited="i">Step 9

Insert the bulb socket assembly into the round hole on the back of the master assembly and plough it well-nigh a quarter turn to the right, locking information technology in place.

<LI id=jsArticleStep10 itxtvisited="1">Step x

Push the assembly all the way into place.

<LI id=jsArticleStep11 itxtvisited="1">Step 11

Replace all iii of the bolts that hold information technology in place. Spiral each one down tightly with your adjustable wrench.

<LI id=jsArticleStep12 itxtvisited="one">Step 12

Supplant the plastic comprehend if your ES300 has one. Button it straight down into identify until you hear each of the plastic snaps make a clicking noise as they engage.

Changing the Bulb Merely

<LI id=jsArticleStep1 itxtvisited="1">Step 1

Complete steps ane through 5 in section ane.

<LI id=jsArticleStep2 itxtvisited="1">Step 2

Put on a pair of gloves. Whatsoever blazon volition work; only brand certain that you lot can still piece of work well with your hands.

<LI id=jsArticleStep3 itxtvisited="ane">Pace 3

Grab the former bulb by its socket and pull information technology straight out.

<LI id=jsArticleStep4 itxtvisited="1">Footstep iv

Agree the new seedling past its socket and push it directly downwardly into the crenel on the socket assembly. It won't make an audible click when information technology's in place, so endeavour to wiggle it or tug on it gently to brand sure it's all the way in.

<LI id=jsArticleStep5 itxtvisited="one">Pace 5

Reinsert the bulb socket assembly in the round pigsty on the dorsum of the master assembly. Turn the socket assembly about one quarter plow to the correct to lock it in place.

<LI id=jsArticleStep6 itxtvisited="1">Step half-dozen

Complete steps ten through 12 in section 1 to insert the headlight assembly dorsum into place.

Source: https://www.stripersonline.com/surftalk/topic/349600-2003-lexus-es300-headlight-bulb-replacement/

Posted by: pilgrimanable.blogspot.com

Share this post